|
Safes opened - Refurbished - Bought & Sold -
serviced with maintenance contracts if required nationwide.
www.justsafes.co.uk
Home
|
Training Room
|
Lock Fitting
|
Lock I.D. & Drilling
| F.A.Q
|
Map Directions
|
Course
Dates |
Application
Form |
Brochure
Request |
Local
Hotels
INTRODUCTION
If you would like to drop in and meet us
at the training room or simply see if this is a trade for you, phone us
for details.
All courses Include teas coffees and
lunches,
B & B available if required click here:
Local
Hotels
.
Option 1 Duration 2 days cost £545.00
Basic two day lock
opening course covering both domestic and commercial lock opening. This
course is designed to give each delegate a substantial base in the locksmith
profession. This course is targeted at those delegates who have little or no
knowledge of the industry and deals in depth with the acquiring of the
varied methods and the techniques of basic domestic and commercial lock picking.
This course is
totally hands on, delegates will be given the opportunity to use
every type of lock pick available on the course.
Multimedia projector slides
are used as an aid for the lock identification, how and why locks and rap key
work.
The course
includes the basic lock opening tools as well the company’s own
comprehensive lock opening and drill point manual. (The
drill point manual is required when a lock has a fault).
Following on from this
course delegates will be offered work from nationwide companies.
During
the course our lectures will be discussing how the Nationwide company’s will
be able to offer work and the requirements for this. Each delegate is
provided with a listing of the main wholesalers from which they can obtain
further tools and locks at wholesale discounted prices. We also offer a full
back up service to all delegates 24 hours a day should they require
assistance.
The
course also includes lunches on both days and tea/coffee during the course.
This course is designed
for non destructive lock opening and teaches all types of techniques used.
Day1 Basic
course
-
We take approximately
500 locks to each training course consisting of virtually every type of
cylinder and mortice lock available.
-
All
courses are totally hands on, the course starts off by totally stripping
and rebuilding a cylinder with a full explanation of how to key-alike &
master key a rim cylinder and euro cylinder.
-
Why
a cylinder is pickable and how to beat the anti-pick pins, the cylinders
you pick start off with are simple cylinders which have no anti-pick
pins and lead onto Yale, Union, Legge, Grundman, Weiser, Assa, Mila etc.
-
On day one you also cover picking tubular locks which are found on
steering wheels & bike locks etc, wafer locks which are found on garage
doors and vending machines we will also teach you how to use jiggler keys
correctly.
-
We
covers the manual picking of virtually every type of pin & wafer lock
you are likely to come across and the picks taught are Mica for
slipping locks, Rap keys for Yale, Union, Legge, Gege and Viro, Electric
pick guns from Hpc & Wendt, Manual pick guns, The new multi-pick gun
which vibrates the pins at 44,000 bounces per minute.
-
Hpc
Tubular picks, Padlock shims, the spiking open of padlocks, The use of
cylinder snapper for euro-cylinders, The use of the letter box tool and
how to attach a wire free covert camera so you don't have a mirror image
in the dark.
-
How to bypass the screw in cylinders normally found in
aluminium doors, we will teach you all the tricks of the trade as we have
done for all past delegates. We will teach you to impression cylinder locks.
On day one you will also make button hooks which are used to open various
mortice locks, wires for opening 3 & 5 lever locks without a curtain, key
turners for locks with or without curtains, wires for the opening of locks
with curtains such as the Union 5 lever Bs locks.
Day 2
-
Covers the opening of
Mortice locks from the basic 2 lever leading on to 3 & 5 Lever locks which
also includes the picking open of Bs3621 locks such as Chubb, Union,
Securefast, Yale etc the openings include the use of all the wires made on
day 1.
-
The use of the 2 in 1 Hobbs type pick, Over-lifters, the curtain wheel
pick, the Plasticine impressioning kits, the pin and cam systems to name a
few.
-
Day
2 also covers the opening of cylinder mortice locks by the use of bypass
methods. The locks opened start off with the basic 2 lever with a button
hook then onto opening 3 lever Union, 5 lever Guardian, Ellis, Bulldog,
etc i.e. virtually every type of mortice lock without a curtain.
-
Moving
onto picking 5 lever locks with a curtain such as Union 5 lever security
and 5 lever Bs3621 locks which can all still be opened using 2 wires.
-
In
the afternoon we move onto lock identification which is an important
part of the course, if you cannot identify a lock you cannot pick or
even know where to drill in the case of a faulty lock.
-
We
will demonstrate the use of the Bs picks for anybody not doing day 3 of
the course which is a day totally hands on with well known locksmiths
and manufacturers of these picks, the rest of the course is dedicated on
how to use the 2mm drill template kits for the opening of Bs locks. The
course closes at 5pm with a questions and answers section.
Option 2
Total of 5 consecutive days Reduced cost for limited
period Cost £900.00
-
Total of 5 consecutive days consisting of the following
courses:
-
2 day Lock picking course covering every type of lock found on domestic
and commercial premises as listed above.
-
1 day with safe ventures on the use of
the picks for Bs3621 locks
-
1/2
day lock Identification and drilling. Includes the drill point manual on cd rom.
pm covers bump keys
-
1/2 day covering the fitting of mortice and cylinder locks.
am covers Upvc
-
1/2 day covering Upvc door mechanisms toe &
heeling and opening methods.
-
1/2 day covering the use of bump & rap keys
-
Please note the Upvc course is taken by
specialists in this field and transport can be arranged from Knebworth if
required.
Option 4
Individual days. £180.00
|
Day 1 BRIEF
DESCRIPTIONS
Stripping and rebuilding a
cylinder, how to master key and key alike cylinders.
Why a cylinder is pickable (
We show you the weak points in manufacture).
Picking cylinders with rakes,
rap keys including dimple locks, electric pick guns, manual pick guns,
individual pin picking & shimming.
The use of the latest
electronic frequency pin cylinder pick.
Impressioning cylinders from
a blank key.
How to use mica (credit card)
correctly.
The use of the letter box
kit. ( also fitted with infra red Cctv and monitor).
Padlock shims & spiking.
Picking open digital locks.
Various c ylinder
snapping tools for euro cylinders.
Bypass tools for screw in
cylinders.
Jiggler keys for wafer locks
as found on garage locks, vehicles etc.
Tubular locks. (bikes -
vending machines etc).
The methods used to beat anti
pick pins in pin cylinder locks.
Pin foil impressioning
cylinders.
DAY 2 MORTICE LOCKS
Stripping a lock to show you
the weak points and why its pickable
Making picks for 2-3-5 lever
mortice locks.
Making key turners & button
hooks.
How to use 2 & 3 lever
jiggler keys correctly, we also have the set of 78 jiggler keys for curtain
locks available for use just to show how fast the Bs picks actually open the
locks compared with the hit & miss approach with the jigglers.
The use of Hobbs type lever
picks (2 in 1 picks) on 3 & 5 lever locks without curtain. ( This pick is an
essential part of any locksmiths tool kit).
Picking 3 lever locks with 2
wires.
Picking 5 lever locks with a
curtain with 2 wires.
The use of the 2mm drill
template kit ( this kit is last resort). We make it and can supply it.
How to use the curtain wheel
pick correctly on various locks including the Bs3621 locks such as Union
Yale Chubb etc.
Lock identification is
covered in detail as this is the hardest part of the job, you have to be
able to identify a lock from the area around the keyhole, all locks have
there own id points, this is the only part of the course which needs pen &
paper. ( Lock ID manual on CD is also included as part of the course).
We will show you how to use
all the British Standard picks available on the market, from pin & cam
systems to plasticine impressioning, these picks open Chubb, Union, Yale,
Ingersol, Era etc, you can open a British Standard lock in a couple of minutes.
There is virtually a pick for every lock on the market and no locksmith
needs to drill a lock unless the lock has a fault.
We use around 500 locks on
each course consisting of virtually every available type of lock.
All the locksmith courses are now held in dedicated
training rooms, we also offer locksmiths courses in lock fitting, drilling
and in depth lock identification which does include a cd on virtually every
available mortice lock, if you would like to drop in on a course to see for
yourself or wish to pick some locks to see if the trade is for you please
simply phone us for the dates and to make an appointment. Day
3 British Standard Lock Picks
Learn to use the 4 method types
used to open all the British Standard locks this day is taken by the
designers of the picks which is the best way to learn all these picks, if
you wish to purchase any of these picks they will sell them to you on the
day or at a later date, they will cover Chubb - Union - Securefast - ERA -
Curtain wheel pick for various curtained locks etc.
Day 4 Lock
identification in depth am
Bump keys pm
Lock identification is a must
for anybody wishing to start out in this trade, if you can't identify a lock
you are unable to pick or drill the lock successfully you must be able to
identify the lock you are working on. This day then continues on to cover
the correct method of drilling mortice and cylinder locks which can be
done to leave the lock in a working condition which is often a necessity.
1/2 day 0n the use of bump keys to open all types of
cylinder locks from basic cylinders to high security including dimple
cylinders, these keys are also known as rap keys and special keys, these
keys can open a lock in seconds when used with the correct tools.
Day 5 Upvc am Lock
fitting pm
1/2 day covering Upvc locks which includes
opening / bypass methods and how to toe and heel a upvc door.
Covers the fitting of mortice
and cylinder locks both by hand and by jig.
If you want to know about bump keys and
physical security bypass here is a
link : video
presentation from the toool.nl website, 600mb long but still worth
watching.
Feedback Rec'd from past delegates.
|
|
Locksmith
Training Services